Customer Service
0 item(s) - RM0.00

Super Series Ultrapure Water system, Resistivity(25℃) 18.2MΩ.cm, No Endotoxin, No RNases, No DNases, HHitech

  • Brand:HHitech
  • Model:MO00730001
  • Availability:In Stock

Available Options

+ -

Description PDF

Ask Question About Product

Note: HTML is not translated!


Laboratory Water Purification System Selection Form (CLICK THIS LINK TO VIEW ALL THE MODELS)


Super series ultrapure water stem (tap water inlet)

Features and advantages:

  • 7.0 inch colorful high-resolution touch screen (16:9) controlling system, achieve finger-touch new experience.
  • 4 way online water quality sensor, detect the quality of feed water, 2nd stage RO water, Edi water and ultrapure water respectively. And warn once water quality´s standard exceeding.
  • 3 way flow sensor, count source water consumption and achieve quantified dispensing of Edi and ultrapure water.
  • Integrate with Ionpure EDI module, the maximum output is 240 liters per day.
  • Built-in independent online TOC monitor module (Super-TOC).
  • Double stage reverse osmosis technology, assure 2nd RO water quality’s stability from different source water.
  • Built-in 3 pump- 1st stage RO pump, 2nd stage RO pump and circulating sanitizing pump.
  • All Cartridges replacing alarm function, based on time, flux and water quality, show cartridges´ used and residual life.
  • Multiple alarm function: no feed water, full water, water quality’s standard exceeding, cartridge life ending and leakage.
  • Auto self-flushing of RO membrane function (interval and continuous time setting), extend RO membrane’s life.
  • Auto running data storing function with built-in SD card, and data can be exported through the USB interface.
  • System continuous upgrading function through USB interface, and WIFI module is optional.
  • Built-in perpetual calendar clock for cartridges and service setting.
  • System sanitizing procedure, achieve the disinfection of ultrapure water’s tube and valve.
  • System circulation function, achieve ultrapure water’s circulation to keep top quality of ultrapure water.
  • Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.
  • Attached 50 liters water tank with conical bottom, including air filter, to prevent co2 and bacteria. Also external tanks is optional.
  • Whole plastic shell with high-strength, avoid rusting and keep clean, to meet GLP standard.
  • 4 door and easy-to-replacing cartridge design, convenient to maintain system and replace cartridges.
  • Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure water’s quality.
  • Optimized pretreatment (including PP fiber, KDF and active carbon cartridge), effectively protect RO membrane.
  • RO module with DOW’s membrane, ensure long life, stable operation and high desalinization rate.
  • Ultrapure cartridge with DOW’s top polishing resin, ensure ultrapure water’s quality up to 18.2 MΩ.cm, with the lowest TOC level.
  • Double wavelength (185&254nm) ultraviolet lamp module, restrain bacteria’s increase and reduce TOC.
  • MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF.
  • (0.45+0.1)µm double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic.



With 7.0 inch touch screen system, 4 way water quality sensor, 3 way flow sensor for quantified dispensing, Ionpure EDI module, built-in TOC module, 2 stage RO and 3 pump system, Super series is topchoice of ultrapure water for high grade experiments.

With tap water inlet, its output is 10 liters/hour. It can produce Edi water and ultrapure water. The Edi water’s resistivity is above 5MΩ.cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.


Model Standard Eliminating endotoxin Low TOC Synthesizing Built-in TOC module
Super 10 Super 10F Super 10V Super 10FV Super-TOC10V Super-TOC 10FV
Output-EDI water* 10 liters/hour
Output-ultrapure water Up to 2 liters/minute (when tank is full)
Ultrapure water quality  
Resistivity(25°C) 18.2MΩ.cm
TOC* <10ppb <10ppb <3ppb <3ppb <3ppb <3ppb
Bacteria <0.01cfu/ml
Particle(>0.1µm) <1/ml
Endotoxin N/A <0.001Eu/ml N/A <0.001Eu/ml N/A <0.001Eu/ml
RNases N/A <1pg/ml N/A <1pg/ml N/A <1pg/ml
DNases N/A <5pg/ml N/A <5pg/ml N/A <5pg/ml
EDI water quality  
Resistivity(25°C) >5MΩ.cm
TOC* <30ppb
Silicon rejection rate >99.9%
Feed water requirements Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2
Dimension and weight Length×Width×Height:545×470×639mm, 28Kg
Electrical requirements AC200-240V, 50/60Hz
Power 240W
Standard configuration Main body (Including 1 set of cartridge)+50 liters PE tank (TOC model:+ built-in TOC module)
*The value will be influenced by temperature and feed water´s quality.